JOY OCEAN GROUP (H.K.) LED

CONNECT FOR ROPE LIGHT 彩虹管联接方法

To use the Rope light well and convenient, lead a good installation, our accessories are very helpful and necessary. For safety sake, please use our professional combination kits.
The follows only a simple way tell you how to connect the rope light.

The connect way for the Round rope light:


Step 1	Step 2	Step 3
Cut the rope light in the "Mark" place	Put in the "Cover"	Ready the "Power Cable"

Step 4

Put in the Pins of the Power Cable connect with the Wires of the rope light.


Step 5	Step 6
Screw the Cover into the Power Cable.	Put in the Endcap. (Glued it be better.)

The connect way for the Square rope light:

All	Step 1	Step 2	Step 3
The view of all steps.	Open the Connecter	Insert one side of the Pins' connecter into the Power cable	Insert the other side of the Pins' into the wires of Rope


Step 4	Step 5	Step 6	Step 7
Cover half of connecter	Cover whole connecter	Screew tight	Cover Endcap

Other connecter and accessories:

Cross shape connecter	T shape connecter


L shape connecter	mounting strip


mounting clips	mounting set

If you have other more question for details, please feel free ask us!

INSTRUCTION IN USAGE:
1. It is permitted to be cut ONLY at place with scissor mark (or similar mark);
2. Do NOT plug into power source when Softlight is still in package;
3. Do NOT light them up before installation;
4. Make sure that the rated power is suitable for the marked voltage on Softlight;
5. Do NOT cover Softlight with any materials during in working hours;
6. For outdoor use, Softlight should be sealed well with glue or molded in factory previously;
7. For safety and security sake, don't use accessories from other suppliers;
8. Do not use the Softlight, when it was damaged.

THE FOLLOWS SHOW ALL OF THE SERIES OF OUR PRODUCTS ( OnClick to see the branch manu of them )